InchesCalculator

Electrical / Power & Wattage

Kilowatts (kW) to Kilovolt-Amps (kVA) Conversion Calculator

Calculate apparent power from real power and power factor.

Apparent Power
5.000 kVA

Use the stated electrical relationship and enter values in the displayed units.

Source: Formula conventions follow standard electrical engineering relationships. Verify equipment ratings and local code requirements before installation.
I
Written by
Inchs Calculator Team
Editorial Team

Kilowatts (kW) to Kilovolt-Amps (kVA) Conversion Calculator: What It Measures

Calculate apparent power from real power and power factor. This calculator uses the displayed units and keeps the calculation transparent so you can check the result against a nameplate, battery specification, or electrical design estimate. It is useful for sizing equipment, comparing energy ratings, and translating between common electrical quantities.

How to Calculate Kilowatts (kW) to Kilovolt-Amps (kVA) Conversion Calculator

Step One: Divide real power by power factor

Start with the first relationship in the calculation.

kVA = kW ÷ power factor

Using the calculator’s default values:

4 ÷ 0.8 = 5 kVA

Step Two: Report apparent power

Apply the unit conversion or electrical factor needed for the final result.

S = P ÷ PF

Using the same example:

5 kVA

Important Assumptions

Use the correct nominal voltage, phase arrangement, power factor, resistance, time period, and efficiency for the equipment being evaluated. The result is an estimate for planning and education, not a substitute for manufacturer data, local electrical code, or a qualified electrician.

About the formula: Use the stated electrical relationship and enter values in the displayed units.

Frequently Asked Questions

How does this kilowatts (kw) to kilovolt-amps (kva) conversion calculation work?+

Enter the required values in the displayed units, then apply the relationship shown in the formula explanation. The result is calculated from the electrical relationship between the input quantities.

What units should I use?+

Use the units printed beside each input, such as volts, amps, watts, ohms, seconds, hours, or amp-hours. Convert source values before entering them if needed.

Can I use this result for final electrical installation decisions?+

Use the result as an estimate and compare it with equipment nameplates, manufacturer specifications, conductor limits, protection requirements, and local electrical code before installation.

Related calculators

Kilovolt-Amps (kVA) to Kilowatts (kW) Conversion CalculatorKilowatts (kW) to Volt-Amps (VA) Conversion Calculator